Toro LX Lawn Tractor - Page 24

CHASSIS
3-10 LX Lawn Tractor Service Manual
3
Fig 038 PICT-7466
Fig 040 PICT-7469a
11. Secure the wire harness to the right hand hood pivot
bracket with a cable tie (Fig. 038).
13. Position the ball joint into the axle assembly (Fig.
040).
Fig 039 PICT-7468a
Fig 037 PICT-7464
Note: The following steps, 12 thru 21, should be
done on both the right and left sides of the
axle.
12. Insert the axle assembly into the pivot axle (Fig.
039).
10. Apply electrical tape to secure the wire harness to
the plastic harness guide (Fig. 037).