Toro Spray Master Series - Page 30

FillingtheSpreaderHopper
Maximumhopperweightcapacity:100kg(220lb)
1.Drivethemachinetotheworksite.
2.Movethemachinetoalevelsurface,move
motion-controllevertotheNEUTRALposition,
shutofftheengine,waitforallmovingpartsto
stop,removekey,andengageparkingbrake.
3.Ensurethatthehopper-doorcontrolisinthefully
forward(closed)position;refertoAdjustingthe
Hopper-DoorControl(page26).
4.UsetheSpreadingCharts(page31)to
determinethesettingforthedrop-ratecam
(Figure25).
Note:Ifthesettingisnotlistedforthetypeof
materialthatyouareusing,setthecamtothe
settingwithalowervaluethenadjustasneeded.
g312531
Figure25
1.Cover
3.Drop-ratecam
2.Hopper
5.Removethecoverfromthehopper,addthe
materialthatyouarespreading,andinstallthe
coverontothehopper(Figure25).
Note:Donotoverloadthehopper;the
maximumweightcapacityofthehopperis100
kg(220lb).
Note:Youmayplaceextrabagsofgranular
materialinthecargoboxesbehindthespray
tanks.
30