TOS SUA 125 NUMERIC - Page 10

SUA 125 NUMERIC
34200003 TOS a.s. 02/2011
10
3. Heat risks:
No heat risks are occurred.
4. Noise risk with consequent:
Noise metering record.
4.1. Reduction of hearing
Motion of power and geared parts. Cutting
process. Noise resonance of machined material.
In course of machining.
In lathe proximity.
5. Vibration risks:
Vibration metering record.
6. Radiation risks:
Unrelated.
7. Risks caused by machined
materials and liquids used in
machining process:
7.1. Contact or inhalation of harmful
vapours of liquid, gas, mist, smoke and
dust.
Conditions in lathe proximity caused by
particles of machined material, drops of cutting
lubricant or arised mist
In course of machining
In lathe proximity.
7.2. Fire or explosion risk
Flammable machined material.
Mist making
Loss of cutting lubricant supply to the point of
machining. In line breakdown to the power
electric hydraulic or lubricant systems
In course of machining
In lathe proximity.
7.3. Biological and microbiological
risks
Contact with hydraulic or cutting lubricant
either in liquid state or in mist which consists of
chips,bacteria e.t.c....
In course of the working
process control and in
maintenance
In lathe proximity.