SUA 125 NUMERIC
34200003 TOS a.s. 02/2011
113
14. Data for urgent help.
Lathe is equiped with an emergency stopping device in case of urgent help and hazard which is connected with the
machining process.
Hazards can be occured:
- as a result of irregularities (malfunction of lathe, inacceptable characteristics of machined material, operator fault, etc.).
- in normal running.
Emergency stopping device corresponds, in a conception type of lathe, to ČSN EN 418 Standard.
The emergency stopping device of lathe is a function which:
- defends against hazard.
- reduces existing hazard of operator.
- stops the lathe damage.
- stops the workpiece damage.
- is put into function by human activity only.
The emergency stopping device consists of:
- the controlling device which calls an emergency stopping alarm after putting its actuating mechanism into activity.
- the actuating mechanism which is a part of the controlling device controlled by the operator.
- the driving mechanism for motion of lathe.
To Next Page