e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-7
Mac
For Macintosh
* This adjustment will have an effect only on full-color printing.
Open the print dialog box. Change the "Image Type" option.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS Menu
10.2.x "Printer Features" Ö "Feature Sets: Color settings 2" Ö "Image Type"
10.3.x / 10.4.x/10.5x "Color Settings 1" Ö "Image Type"
* This adjustment will be effective, only if a file created on a general application, such as Microsoft Office,
is printed in PostScript (PS3, XPS and Macintosh). It may not be effective, if a file created on a graphic
application (e.g. Illustrator) or a DTP application (e.g. QuarkXPress) is printed, or a PDF file created on
these applications is printed using the C, M, Y and K toners. Unmark the "Use PostScript Passthrough"
checkbox in the "PostScript Setting" options in the "Others" tab. The "Image Quality Type" option will be
effective, if printing on Windows (PS3) is performed (but not on Macintosh) or if a file created on the
above applications is printed. However, the color balance may be changed, and also the image quality may
be diminished, depending on the type of file.
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
