e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
1-8
1.2.2 To Adjust the Density on a Photo or Gradational Image
If the density is decreased If the density is increased
An original containing halftones, such as a
photo image becomes lighter.
An original containing halftones, such as a
photo image becomes darker.
Explanation
A particular color can be intensely darker or lighter, depending on the type of paper or original used. Adjust the
intensity of the laser, in order to adjust the density on the photo or gradational image (halftones) and obtain the
image quality the user desires.
Procedures
* The service technician must perform the adjustment in accordance with the procedures below.
1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
To Next Page
Loading...
Need help?
General
