e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-68
3.17 To Decrease the Image Density and Save Toner
(To Print in the Toner Save Mode)
Before the adjustment After the adjustment
Default printing. Printing is performed, while the toner is
being saved.
Explanation
The e-E-STUDIO2330C/2820C/2830C/3520C/3530C/4520C offers a toner save mode. It is intended to
automatically decrease the image density and reduce the amount of toner used. Change the option on the printer
driver and perform printing in the toner save mode, for instance, if a large number of copies have to be printed,
or if the image density is too high.
Procedures
* Both the service technician and the user can perform all adjustments.
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
