e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-94
3.24 To Print a Full-Color Original in Two Colors
Before the adjustment After the Adjustment
The original is printed in the Full color mode. The areas other than black is printed in the
same color (Red).
Explanation
Select the twin color print mode option, in order to change colored text and lines on full-color original and print
out the original.
* The Twin-color print mode particularly affects originals containing clear text and lines. It does not affect
originals where gradations of photo images are required.
Procedures
* The procedure to use varies depending on whether "To Adjust Colors", "To Adjust the Sharpness" or "To Print a
Full-Color Original in Two Colors". Refer to the procedure corresponding to the particular user’s request.
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
