e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-16
3.5 To Maintain a Uniform Gray Hue
(To maintain Consistency in Gray among Text, Photos and Graphics)
Before the adjustment After the adjustment
How gray is reproduced varies depending on
the type of original. As a result, there are
variations in gray.
All color toners are used to reproduce gray.
As a result, consistency is maintained in the
gray hue.
Explanation
For printing, only the K toner is usually used to reproduce gray areas of drawing data, lines and text. On the
other hand, all color toners (C, M, Y and K) are used to reproduce gray areas of image data, such as BMP, GIF,
JPEG and TIFF. This provides a deeper gray on the printouts. Change the option on the printer driver, in order
to maintain consistency in the gray hue between the drawing data and the image data.
Photo area
Text area
Photo area
Text area
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
