e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
5-15
5.6 To Scan an Original, while Enhancing Black
Before the adjustment After the adjustment
Black is not dark enough, compared to the
original.
Black is enhanced and closely matched with
the original hue.
Explanation
When a full-color original is scanned, black is not dark enough, compared to the original. (In general, the
scanned-in image is likely to become less dark.) Finely adjust the black density of the scanned-in image, in
order to darken black and closely match it with the original hue.
* This adjustment will have an effect only on the image scanned in the Full color mode (including the Auto color
mode).
Scan Scan
5. Scanning-specific Adjustments
To Next Page
Loading...
Need help?
General
