e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-45
(2) Change the "Background adjustment" option on the printer driver.
For Windows
*This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver and press [Setting] button in the "Image Quality" tab. And then
set the "Background Adjustment" option in the "Image Attribute" tab within the range of "-1" to "-4".
Precautions after the completion of the adjustment
• The adjustment in procedure (1) may possibly provide insufficient photo contrast images. Therefore, carefully
perform the adjustment, while checking the printouts.
PCL6 PS3 XPS
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
