e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-70
Mac
For Macintosh
Open the print dialog box. Enable the "Toner Save" option.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS Menu
10.2.x "Printer Features" Ö "Printing Modes" Ö "Toner Save"
10.3.x / 10.4.x/10.5x "Color Settings 1" Ö "Toner Save"
Precautions after the completion of the adjustment
The adjustment may possibly provide the image density lower than the user desires, when printing is performed
in the toner save mode. Therefore, carefully perform the adjustment, while checking the printouts.
Remarks
The print density in the toner save mode can also be adjusted. For further information regarding the adjustment
procedures, refer to 3.18 To Adjust the Image Density in the Toner Save Mode.
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
