e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-78
Mac
For Macintosh
Open the print dialog box. Enable the "Do not Print Blank Pages" option.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS Menu
10.2.x "Printer Features" Ö "Printing Modes" Ö "Do not Print Blank Pages"
10.3.x / 10.4.x/10.5x "Print Mode" Ö "Do not Print Blank Pages"
Precautions after the completion of the adjustment
The adjustment may not possibly operate the following options as programmed. Therefore, pay special attention
to the combination of options.
• Booklet printing • N-up printing • Use Front Cover
• Use Back Cover • Interleave Pages
Remarks
If any data are inserted in the header or footer of a particular page on Excel or Word, even though no data are
present in the body, the page will not be recognized as a blank page. The header or footer will be printed out.
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
