e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-90
Halftone [05] code Subcode Recommended value
Acceptable
value
range
Default
Smooth 05-8071 0/1/2/3/4/5/6/7/8/9
Detail 05-8070 0/1/2/3/4/5/6/7/8/9
Set a value lsmaller than
the default.
0 to 255 128
Subcode Paper type
0 Plain paper
2 Recycled paper
3 Thick 1
4 Thick 2
5 Thick 3
6 Thick 4
7 Special 1
8 Special 2
9 OHP
* Set the value in increments of approximately 30, while checking the printouts until the optimum value is
obtained.
Precautions after the completion of the adjustment
The adjustment may possibly cause dark areas such as shades on photo images to look unnaturally faint.
Therefore, carefully perform the adjustment, while checking the printouts.
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
