200 Network Administrator’s Guide — Troubleshooting Hardware Errors
The Add Staples error icon indicates you need to add staples to the finisher. For information
on resolving the error condition, refer to “ADDING STAPLES (OPTIONAL)” in Operator’s
Manual for Basic Function.
• Serviceman Calls
The Service Call error icon indicates that a call for service is needed. Contact your service
representative.
TopAccess Error Messages
Message Log
NOTE: • The error messages displayed in the Touch Panel Display are described in the
Operator’s Manual for Basic Function.
The following messages may appear in the TopAccess messages log.
TopAccess Message Corrective Action
Front Cover Open - Please Close Cover. Close the Front Cover.
Main Feeding Cover Open - Please Close
Cover.
Close the Main Feeding Cover.
Transfer Cover Open - Please Close Cover. Close the Transfer Cover.
Large Capacity Feeder Cover Open - Please
Close Cover.
Close the Large Capacity Feeder Cover.
Drawer Open - Please Close Cover. Close the drawer.
Auto Duplex Unit Cover Open - Please Close
Cover.
Close the Duplex Unit Cover.
Relay Unit Cover Open - Please Close Cover. Close the Relay Unit Cover.
Finisher Joint Cover Open - Please Close
Cover.
Close the Finisher Joint Cover.
Staple Door Open - Please Close Cover. Close the Staple Door.
Lower Tray Transport Cover Open - Please
Close Cover.
Close the Lower Tray Transport Cover.
Lower Tray Delivery Cover Open - Please
Close Cover.
Close the Lower Tray Delivery Cover.
Lower Tray Front Cover Open - Please Close
Cover.
Close the Lower Tray Front Cover.
Punch Unit Front Cover Open - Please Close
Cover.
Close the Punch Unit Front Cover.
To Next Page
Loading...
