32 Network Administrator’s Guide — Setup Flow for Printing Features
• Text data file
Setup procedure
Step 1: Setting up the POP3 account for this equipment in the incoming mail
server.
P.185 "Setting up DNS and Mail Servers"
Step 2: Setting up the TCP/IP and the HTTP Network Service to enable TopAc-
cess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel Display the
first time you use it, to make TopAccess available. Please see the User Functions Guide to
configure the TCP/IP and HTTP Network Service from the Touch Panel Display, or from
TopAccess.
P.53 "Setting up the TCP/IP"
P.58 "Setting up the HTTP Network Service"
Step 3: Setting up the POP3 Network Servers to specify the POP3 server.
P.61 "Setting up the POP3 Network Service"
Step 4: Setting up the Email Print Service.
P.93 "Setting up the Email Print"
Step 5: Now any users can print a file by sending an Email message.
Any Email client software can be used to send a print job to this equipment. For more infor-
mation about Email printing, please see the Printing Guide.
To Next Page
Loading...
