58 Network Administrator’s Guide — Setting up Network Settings
Setting up the NetWare Session
In NetWare Session, you can set the NetWare Bindery or NDS service. This must be set when
configuring a Novell printing environment.
1) Enable Bindery
Select whether the NetWare Bindery mode for Novell printing is enabled or disabled. When
you configure a Novell printing environment with the NetWare server in bindery mode, you
must enable this.
2) Enable NDS
Select whether the NetWare NDS mode for Novell printing is enabled or disabled. When
you configure a Novell printing environment with the NetWare server in NDS mode, you
must enable this. When this is enabled, you should also specify the context and tree for the
NDS.
3) Context
Enter the NDS context that the NetWare print server for this equipment is located.
4) Tree
Enter the NDS tree.
Setting up the HTTP Network Service
In HTTP Network Service, you can enable or disable Web-based services such as TopAccess,
e-Filing web utility, and IPP printing.
1) Enable HTTP Server
Select whether the Web-based services such as TopAccess, e-Filing web utility, and IPP
printing are enabled or disabled.
2) Primary Port Number
Enter the port number for the NIC HTTP server. Generally “80” is used for this port.
3) Secondary Port Number
Enter the port number for TopAccess and the e-Filing web utility. Generally “8080” is used
for this port.
1
2
3
4
1
2
3
To Next Page
Loading...
