66 Network Administrator’s Guide — Setting up Copier Settings
5. Click [OK] to apply the changes.
NOTE: • When using the Internet Explorer, the settings that are displayed in each field may
not be changed even if you change the settings and click [Save]. However, the set-
tings have been changed in the equipment. In that case, click the Copier submenu
then the page displays the current settings in each field.
Setting up the Copier Settings
In Copier Settings, you can set the default copier settings that apply for copy operation from the
Touch Panel Display.
1) Color Mode
Select the default color mode for copying.
2) Original Mode for Color
Select the default original mode for color originals.
3) Original Mode for Black
Select the default original mode for black/white originals.
For e-STUDIO450 Series and e-STUDIO280 Series:
The “Color Mode” option is not available for e-STUDIO450 Series and e-STUDIO280 Series.
For e-STUDIO450 Series and e-STUDIO280 Series:
The “Original Mode for Color” option is not available for e-STUDIO450 Series and
e-STUDIO280 Series.
1
2
3
4
5
6
7
8
9
10
11
12
To Next Page
Loading...
