Network Administrator’s Guide — Setting up Fax Settings 69
Setting up Fax Settings
In the Fax submenu page in the Setup menu, an administrator can configure the fax device set-
tings and the settings initially apply to fax operations.
NOTES:
• Some settings may not apply to the Touch Panel Display as soon as you save the
settings. When you change the settings, press the [RESET] button on the Control
Panel before an operation.
• The Fax submenu page in the Setup menu is available only when the optional Fax
unit is installed.
Setting the fax settings
1. Access TopAccess in the administrator mode.
P.15 "Accessing TopAccess Administrator Mode"
2. Click the Setup menu and Fax submenu.
• The Fax submenu page is displayed.
3. In the Fax submenu page, set the fax settings as required.
• To set the Fax Settings, see the following:
P.70 "Setting up the Fax Settings"
4. Click [Save].
• The confirmation dialog box appears.
SUPPLEMENT: • If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
To Next Page
Loading...
