Toshiba e-STUDIO 450 - Placing Originals on the Glass; Glass Platen Original Placement

46 Network Administrator’s Guide — Setup Flow for e-Filing Features
Setup procedure
Step 1: Setting up the TCP/IP.
When this equipment is connected to the TCP/IP network, you should set the TCP/IP from
the Touch Panel Display the first time you use this equipment to make TopAccess available.
Please see the User Functions Guide to configure the TCP/IP from the Touch Panel Display,
or from TopAccess.
 P.53 "Setting up the TCP/IP"
Step 2: Setting up the HTTP Network Service to enable e-Filing web utility.
To access e-Filing using the TWAIN driver and File Downloader, the HTTP Server option
must be enabled because the software accesses e-Filing on this equipment using the HTTP
protocol.
 P.58 "Setting up the HTTP Network Service"
Step 3: Advise users to install the TWAIN driver and File Downloader.
Users can install the TWAIN driver and File Downloader from the Client2 CD-ROM. For
more information about the installation, please see the e-Filing Guide.