2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
SELF-DIAGNOSIS MODES
2 - 207
Development [Auto-toner] 200, 201 [Auto-toner] 414, 455
[Toner near-empty] 971, 8523, 9804
[Toner cartridge] 499
High-voltage
transformer
[Main charger] 210, 248
[Developer] 205
[Transfer] 221, 2083, 2084
[Separation bias] 234
[Transfer] 491, 492, 493, 830, 868, 869, 2987,
5000, 5001-0 to 2, 5002, 5003, 9814, 9815
[Main charger] 805, 807, 808, 809, 864, 865,
866, 867, 5131
[Developer] 833, 835, 836, 837, 857, 860, 861,
862, 863, 5130
[Separation] 831, 870, 871
Fuser [Status counter] 400
[Temperature] 404-0 to 3, 405-0 to 3, 407, 409,
410, 411, 412, 413, 424-0 to 3, 425-0 to 3,
433-0 to 1, 437, 438, 448, 450, 451, 452, 453,
476-0 to 3, 515, 516, 517, 518, 520, 521, 525-
0 to 3, 527-0 to 3, 535-0 to 1, 536-0 to 3, 537-0
to 3, 539-0 to 3, 540-0 to 3, 541-0 to 3, 800-0
to 1, 801-0 to 1, 802-0 to 1, 803-0 to 1, 804-0
to 1, 886, 896-0 to 1, 5285, 5328, 5329, 5330,
5331, 5332, 5333-0 to 3, 5334-0 to 3, 5335-0
to 3, 5336-0 to 3
[Pre-running] 417, 439, 440, 441, 523, 526
RADF [Aligning amount] 354, 355
[Transporting] 357, 358, 365, 366
[Switchback] 462
Finisher [Folding / Binding position] 468-0 to 2 [Tray reset] 648
[Cascade] 652, 653
[Interruption of stapling operation (no staple) ]
704-0 to 1
[Hole punching] 9847
[Model switching] 1912
[Stapling] 1911, 9811-0 to 3, 9937-0 to 3,
9938-0 to 3
Processing [Temperature/humidity] 247, 270 [Life correction] 2847, 2848
Classification Adjustment Mode (05) Setting Mode (08)
To Next Page
Loading...
