Toshiba e-STUDIO355 - FIRMWARE UPDATING

8
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
FIRMWARE UPDATING
8 - 1
8. FIRMWARE UPDATING
When you want to update the firmware to the latest one or the equipment becomes inoperable due to
some defect in the firmware, updating can be performed as follows.
Equipment
Options
* The harness jig for board connection (HRNS-CNV-DL-JIG) is necessary.
Firmware Updating method
Master data
(HDD program data, System firmware, UI data)
USB media
System ROM
(OS data)
USB media
Download jig
(PWA-DWNLD-350-JIG2)
Engine ROM
(Main firmware)
USB media
Download jig
(PWA-DWNLD-350-JIG2)
Scanner ROM
(Scanner firmware)
USB media
Download jig
(K-PWA-DLM-320)
Model name Firmware Updating method
Reversing Automatic Document
Feeder (RADF)
(MR-3021/3022)
RADF firmware
Download jig
(K-PWA-DLM-320)
Hole Punch Unit
(MJ-6101)
Hole punch unit firmware
Saddle Stitch Finisher
(MJ-1025)
Finisher firmware
Saddle Stitch Finisher
(MJ-1024)
Finisher firmware
Saddle stitcher firmware
Hanging Finisher
(MJ-1031)
Finisher firmware
Finisher
(MJ-1101)
Finisher firmware
Converter firmware
*
Fax Unit
(GD-1250)
FAX firmware