e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSIS MODES
2 - 22
• PM support mode
Fig. 2-5
The number of pages currently output (OUTPUT PAGES/DEVELOP COUNTS), the recommended
number of output pages for PM (PM OUTPUT PAGES/DEVELOP COUNTS), the current drive count
(DRIVE COUNTS) and the recommended drive count for PM (PM DRIVE COUNTS) are output
together with PM units. Use this list for confirming the PM units to be replaced at each PM. See the
following page for PM:
Refer to P.5-1 "5. PREVENTIVE MAINTENANCE (PM)".
PM SUPPORT CODE LIST
'09-02-08 20:13
UNIT OUTPUT PAGES PM OUTPUT PAGE DRIVE COUNTS PM DRIVE COUNTS
DRUM
2516 70000 11735 170000
DRUM BLADE
2516 70000 11735 170000
GRID
2516 70000 11735 170000
NEEDLE ELECTRODE
2516 70000 11735 170000
SEPARATION FINGER(DRUM)
2516 70000 11735 170000
RECOVERY BLADE
411 70000 8625 170000
DEVELOPER
411 70000 8625 170000
TRANSFER ROLLER
411 70000 8625 170000
OZONE FILTER
411 70000 8625 170000
FUSER ROLLER
411 70000 8625 170000
PRESS ROLLER
411 70000 8625 170000
SEPARATION FINGER(FUSER)
411 70000 8625 170000
To Next Page
Loading...
