Toshiba HX7+ ASD - Page 108

HX7+ ASD Installation and Operation Manual 99
Custom V/f Five-Point Setting #4 Voltage
Program Special Control V/f Five-Point Setting
The Custom V/f Five-Point Setting #4 Voltage establishes the percentage of
the output voltage that is to be associated with the frequency setting of
F196
(Custom V/f Five Point Setting #4 Frequency).
See F190 for additional information on custom V/f curves.
Direct Access Number — F197
Parameter Type — Numerical
Factory Default — 0.0
Changeable During Run — No
Minimum — 0.0
Maximum — 100.0
Units — %
Custom V/f Five-Point Setting #5 Frequency
Program Special Control V/f Five-Point Setting
The Custom V/f Five Point Setting #5 Frequency sets the frequency to be
associated with parameter
F199 (Custom V/f Five Point Setting #5 Voltage).
See F190 for additional information on custom V/f curves.
Direct Access Number — F198
Parameter Type — Numerical
Factory Default — 0.0
Changeable During Run — No
Minimum — 0.0
Maximum — 299
Units — Hz
Custom V/f Five-Point Setting #5 Voltage
Program Special Control V/f Five-Point Setting
The Custom V/f Five-Point Setting #5 Voltage establishes the percentage of
the output voltage that is to be associated with the frequency setting of
F198
(Custom V/f Five Point Setting #5 Frequency).
See F190 for additional information on custom V/f curves.
Direct Access Number — F199
Parameter Type — Numerical
Factory Default — 0.0
Changeable During Run — No
Minimum — 0.0
Maximum — 100.0
Units — %
F197 F199