Toshiba HX7+ ASD - Page 41

32 HX7+ ASD Installation and Operation Manual
Figure 8. HX7+ ASD Terminal Board (P/N 48570).
SW1 and SW2 may be
switched to change the full-
scale range of the AM and FM
output terminals. See
F670 and
F005 for more information on
the AM and FM terminal
adjustments, respectively.
SW1
TB1
0–1 mA
4–20 mA
CN7A
{
{
SW2
0–1 mA
4–20 mA
The remaining input and output terminals of the Terminal Board are shown below.
For more information on these terminals see pg. 28.
RRP24
RES
F
ARS1S2S3S4C CA
OUT1 OUT2
To Control Board
TB1
CN7A
TB3
TB4
TB2