SAFETY
Page 5
QUALIFIED OPERATORS ONLY
Only qualified persons are to install, operate, or service this equipment according to all
applicable codes and established safety practices.
A qualified person must:
Carefully read the entire instruction manual.
Be skilled in the installation, construction or operation of the equipment and aware
of the hazards involved.
Be trained and authorized to safely energize, deenergize, clear, ground, lockout and
tag circuits in accordance with established safety practice.
Be trained and authorized to perform the service, maintenance or repair of this
equipment.
Be trained in the proper care and use of protective equipment such as rubber
gloves, hard hat, safety glasses, face shield, flash clothing, etc. in accordance with
established practices.
Be trained in rendering first aid.
SAFETY CODES
Toshiba medium voltage controllers are general purpose, Class E, magnetic controllers
designed and built in accordance with the latest applicable provisions of NEMA ICS 2-324,
UL 347 and the National Electrical Code. Installations must comply with all applicable
state and local codes, adhere to all applicable National Electric Code
standards
and instructions provided in this manual.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
To Next Page
Loading...
Need help?
General
