Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
Qosmio X300 Maintenance Manual 4-27
Installing the Optional Express Dummy Card or PC Card
Install the Express Dummy Card or PC card according to the following procedures and Figure
4-12, after checking that the computer is turned off in boot mode.
1. Insert the Express Dummy Card or PC card.
2. Gently push it and release when it clicks in place.
3. Check that the card is seated securely.
After the Express Dummy Card or PC card is installed, check the hardware configuration in the
Hardware Setup or TSETUP program to make sure that the Express Dummy Card or PC card is
compatible with the current hardware configuration.
To Next Page
Loading...
Need help?
General