Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
Qosmio X300 Maintenance Manual 4-31
Installing the Top Cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-14, 4-15.
1. Seat the top cover, adjusting its position.
2. Connect the eight cables as indicated in Figure 4-15.
3. Secure the top cover with three M2.5x10 screws.
4. Turn the computer upside down and secure it with the following 18 screws:
− fourteen M2.5x10 screws
− two M2.5x6 screws
− two M2.5x4 screws
To Next Page
Loading...
