Toshiba RAS-B10J2KVG-E - Specifications of Electrical Parts

6-1. Indoor Unit
6-2. Outdoor Unit
No. Type name Specifications
1 Compressor
RAS-05,07,10
KSK75D43UEZA 3-Phases (6-Poles) ; 550W
RAS-13 KSK89D53UEZ
3-Phases (6-Poles) ; 620W
RAS-16,18
KSN108D22UFZ 3-Phases (6-Poles) ; 750W
2 Fan Motor WDF-340-A43-1 DC 140-340V ; 43W
3 Pulse Modulating Valve (PMV) coil PQ-M10012-000313 DC 12V
4 4-Way valve coil DXQ-939 AC 220-240V
5 Reactor
RAS-16,18
CH-69-Z-T L = 19mH, 10A
6 Suction temp. sensor (TS sensor) (Inverter attached)
10kΩ at 25°C
7 Discharge temp. sensor (TD sensor) (Inverter attached)
62kΩ at 20°C
8 Outside air temp. sensor (TO sensor) (Inverter attached)
9 Heat Exchanger temp. sensor (TE sensor) (Inverter attached)
10kΩ at 25°C
10 Terminal block (5 poles) JXO-5B
AC 250V, 20A
Parts name
10kΩ at 25°C
No. Typeype Specificat
1 Fan Motor (for indoor)
RAS-B05,07,10,13
SJM-240-25 AC 220~240V, 25W
RAS-B16
SJM-240-35 AC 220~240V, 35W
2 Room temp. sensor (TA-sensor) (-) 10kΩ at 25°C
3 Heat exchanger temp. sensor (TC-sensor) (-) 10kΩ at 25°C
4 Heat exchanger temp. sensor (TCJ-sensor)
(-)
Parts name
5
Louver motor
24BYJ48-ST
Output (Rated) 4 phase, DC12V
10kΩ at 25°C
6. SPECIFICATIONS OF ELECTRICAL PARTS
RAS-18
ICF-340-30-6 DC 340V, 42W
FILE NO. SVM-19001
- 24 -