5. ECO / SILENT OPERATION
To automatically control room temperature to save energy (Except in DRY and FAN ONLY mode)
Note: Cooling operation; the set temperature will increase automatically 1 degree/hour for 2 hours
(maximum 2 degree increase). For Heating operation the set temperature will decrease.
•
7. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
•
Pressing the RESET button, the unit can start or stop without using
the remote control.
1.
Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is automatic speed.
2.
8.AUTO RESTART OPERATION
To automatically restart the conditioner after the power failure (Power of the unit must be on.)
•
Setting
Press and hold the RESET button on the indoor unit for 3 seconds to set the
operation.(3 beep sound and OPERATION lamp blink 5 time/sec. for 5 seconds)
Do not operate ON timer and OFF timer.
Press and hold the RESET button on the indoor unit for 3 seconds to cancel the
operation. (3 beep sound but OPERATION lamp does not blink)
In case of timer are set, AUTO RESTART OPERATION does not activate.
6. TIMER OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
NORMAL
➝
ECO
➝
SILENT
ECO OPERATION
SILENT OPERATION
To reduce outdoor sound level during operation (Except in DRY and FAN ONLY mode)
Note: Though operating silently, the Heating or Cooling capacity is still prioritized to ensure
having sufficient comfort inside the room.
ECO and SILENT operation setting
Note: ECO and SILENT operation symbol will appear on remote control display.
Setting the OFF timer
1
Press for enter OFF timer setting.
2
Press for select desired OFF timer. (0.5 - 12 hrs)
3
Press for set OFF timer.
4
Press again for cancel OFF timer.
Note: TIMER OPERATION symbol will appear on remote control display.
To Next Page
Loading...
