Toshiba RAS-B10J2KVG-E - 10-2. Installation

Fig. 10-2-1
Secure the outdoor unit with fixing bolts and nuts if the unit is likely to be exposed to a strong wind.
Use ∅ 8 mm or ∅ 10 mm anchor bolts and nuts.
·
·
· If it is necessary to drain the defrost water, attach drain nipple 9 and cap waterproof 10 to
the bottom plate of the outdoor unit before installing it.
10-2-1. Optional installation parts
10-2. Installation
<Fixing bolt arrangement of outdoor unit>
Part
code
Parts name Q’ty
A
One
each
B
Pipe insulating material
(polyethylene foam, 6 mm thick)
1
C
Putty, PVC tapes
One
each
Refrigerant piping
Liquid side : Ø6.35 mm
Gas side : Ø9.52 mm
(RAS-B05,07,10,13J2KVG-E)
: Ø12.70 mm
(RAS-B16J2KVG-E,18J2KVG-E)
FILE NO. SVM-19001-1
- 59 -
Drain outlet
Air inlet
Air outlet
108 mm
28 mm
600 mm
320 mm
125 mm
86 mm
102 mm
90 mm
Ø25 mm
Air inlet
Air outlet
280 mm
500 mm
53 mm
97 mm
Ø25 mm
Drain outlet
RAS-05, 07, 10, 13J2AVG-E RAS-16, 18J2AVG-E
300 mm
340 mm