Toshiba RAS-B10J2KVG-E - Automatic Operation; Cooling; Heating; Fan Only Operation; Parts Name of Remote Contr Oller; Remote Controller and Its Fuctions

18
3
4
5
6
7
8
10
19
1
9
11
12
Infrared signal emitter
Start/Stop button
Mode select button (MODE)
Temperature button (TEMP)
Fan speed button (FAN)
Swing louver button (SWING)
Set louver button (FIX)
Off timer button (OFF)
High power button (Hi-POWER)
ECO/SILENT button (ECO/SILENT)
Clear button (CLEAR)
Check button (CHECK)
2
9-4. Remote Controller and Its Fuctions
9-4-1. Parts Name of Remoe Controller
9-4-2. Operation of remote control
1. AUTOMATIC OPERATION
To automatically select cooling, heating or fan only operation.
2. COOLING / HEATING / FAN ONLY OPERATION
1. Press : Select Cool , Heat , or Fan only .
2. Press : Set the desired temperature.
Cooling / Heating : Min 17°C - Max 30°C, Fan Only: No temperature indication
MODE
3. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press
2. Press
: Select Dry .
: Set the desired temperature. Min. 17°C, Max. 30°C
4. Hi-POWER OPERATION
Press : Start and stop the operation.
To automatically control room temperature and airflow for faster cooling or heating operation
(except in DRY and FAN ONLY mode).
MODE
: Select AUTO, LOW , LOW+ , MED , MED+
, HIGH 3. Press
FAN
FAN
, or QUIET .
, HIGH
MODE
1. Press
2. Press
3. Press
: Select A.
: Set the desired temperature. Min. 17°C, Max. 30°C.
: Select AUTO, LOW , LOW+ , MED , MED+
Note: Dry Mode fan speed is set to Auto only.
MODE
Hi POWER
ECO
SILENT
OFF
4
5
"
!
1
2
7
8
#
3
9
6
Note: Hi-POWER operation symbol will appear on remote control display.
, or QUIET .
FILE NO. SVM-19001
- 55 -