Item
19. QUIET mode
Operation flow and applicable data, etc.
Description
Remarks :
1. Quiet mode is unable to work in dry mode.
2. Quiet mode is appropriate to work with less
Quiet mode is the system which, control the
revolving speed of indoor fan to work
constantly at lower than speed L. In addition,
noise level of indoor unit is less than usual.
When the "Quiet mode" selected from [ FAN ] button;
- The fan of the indoor unit will be restricted the
revolving speed at speed UL.
- The compressor speed is controlled as shown
in the figure.
cooling load and less heating load condition.
Because of the fan speed may not enough
the cooling capacity or heating capacity.
Model
05K 07K
Cool/Heat min 20.4 20.4
Quiet Cool (Hz) 20.4 21.6
Quiet Heat (Hz) 23.4 30.6
When is cancel "Quiet mode". The [ FAN ] is
selected other speed.
10K
20.4
31.2
39.6
Model
13K 16K
Cool/Heat min 20.4 20.4
Quiet Cool (Hz)
34.2 40.8
Quiet Heat (Hz)
32.4 45.0
18K
16.2
26.4
37.2
20. Silent
Operation
Silent button on remote controller is pressed.
Silent 1:
Cooling/heating capacity is limited maximum
for 70% of rated. Only compressor speed is
limited.
This function is used when the user need
to keep silent at outdoor side. It is limit
maximum compressor speed. Sound
level can be implemented by silent level.
Sound level:
Rated level > Silent 1
Note:
Due to Silent operation reason,
In adequate cooling/heating capacity
may occur.
Silent Operation description
ECO AND SILENT OPERATION
Model
Silent operate
Silent1
25.8 normal 36.0 normal
Silent1
37.8 normal 48.0 normal
Silent1
46.2 normal 57.0 normal
Silent1
55.2 normal 57.0 normal
Silent1 44.4 normal 65.4 normal
Silent1
36.0 normal 58.2 normal
Cooling Heating
RAS-18J2KVG-E
RAS-B16J2KVG-E
RAS-B13J2KVG-E
RAS-B10J2KVG-E
RAS-B07J2KVG-E
RAS-B05J2KVG-E
Press
: Start and stop the operation.
NORMAL ECO SILENT
To Next Page
Loading...
