AUTOMATIC DIALING (continued)
AUTOMATIC DIALING KEYS
PROGRAMMABLE OPTION
After accessing a CO line, automatic dialing for
telephone number storage and use is available by de-
pressing the
m
key instead of a 2-digit access code.
Each
m
key stores one telephone number (up to
16 digits).
TO STORE A TELEPHONE NUMBER*
1)
Do not lift the handset.
2) Depress the
i
(or
m
)
and
1
(or
m
)
keys,
respectively.
3)
Depress the
m
key you wish to use.
4) Dial the telephone number to be stored (16 digits
maximum).**
5) Depress the
m
(or
m
)
key to record the num-
ber in memory.
6) Repeat the above steps for each
m
key.
*Repeat this procedure to replace the stored telephone
numbers with new ones.
““It
may be necessary to insert a pause after the trunk
access code to allow for dial tone delay. If so, depress
the
m
(or
m
)
key after entering the PBX
access code.
REPEAT LAST NUMBER DIALED
PROGRAMMABLE OPTION
This feature enables you to automatically redial
the last number called by pressing the
m
key,
which also serves the same function as the
1
key.
(continued)
To Next Page
Loading...
