P-TOSHIBA-q
CALL FUNCTIONS (continued)
TRUNK QUEUING (cont.)
*You may cancel the request at anytime prior to the
actual callback by depressing the
m
key and dialing
0
1,
**lf,
after answering a callback, you hear a busy tone, it
means the trunk has already been seized or received
an incoming call. Your request is not cancelled. You
will be called again the next time a trunk becomes idle.
CALL HOLD and TRANSFER
CALL HOLDING
TO HOLD A CALL (CO line appears on your station)
While connected to an outside call.
demess
the
m
key.
.
l The CO line LED will flash at the l-hold rate.
l
To reconnect the call, depress
themline
key on
hold.
TO HOLD A CALL (CO line does not appear on your
station)
While connected to an outside call, depress the
m
key.
l
The INT LED goes off.
l
To reconnect the call, depress
them
key and the
m
keys.
NOTE:
The on-holdreminder tone
willbe
heard within
aprede-
termined time. Call Holding will be released automati-
cally if the other party hangs up. When a CO line is
placed on hold, it may be picked up at any station with
that CO line appearance.
To Next Page
Loading...
