TOSHIBA
GENERAL INFORMATION
Your Electronic Key Telephone
(EKT)
has been
designed to provide easy access to the wide range of
features offered by your telephone system. The EKT
is equipped with a dial pad, 4, 14 or 24 feature keys,
a speaker with volume control, and a handset.
All the feature keys are plainly marked as to their
purpose. Four keys have fixed assignments:
m
m
*,
m
, and
m
. The remaining 10” or
20’
keys are assigned flexibly as
[9
keys, or as access keys
for the various features.
The voice and ring tone volume levels on the EKT
are controlled by separate volume controls located on
the right side of the telephone. The lower control
adjusts speaker volume for dial tone and voice level;
the upper control adjusts ring tone and voice announce-
ment volume.
“Not available on single-line EKT.
SINGLE-LINE EKT INFORMATION
Your single-line EKT is equipped with a blank
single-
line key/LED that functions as both an intercom
(INT)
and CO line key/LED.
Features are accessed through the use of dial codes
listed in this guide. To access the features that are
allowed using the single-line EKT, a dial code must
be used instead of a feature key. A dial code must
be available to allow the feature to function. For
example, the Automatic Callback
(ACB)
feature is
allowed due to the dial code
1
, while the Do Not
Disturb
(DND)
feature is not allowed.
(continued)
To Next Page
Loading...
