Toshiba Strata VIe - On-Hook Dialing; Speakerphone; Tone Signalling

CALL FUNCTIONS (continued)
INTERCOM CALLS (cont.)
4) Speak when the ring tone ends.
5) Hang up when the call is completed.
“See also Automatic Off-Hook Selection (using single-
line EKT).
Tone signalling can be accomplished by dialing 0 after
the station number.
TO RECEIVE AN INTERCOM CALL
1) You will hear a single long tone, followed by the
caller’s voice.
l The INT LED will flash at the l-called rate.
2) Lift the handset.
l INT LED will flash at the l-use rate.
3) Hang up when the call is completed.
ON-HOOK DIALING
(Handsfree model only- see Speakerphone for speaker-
phone E KTs)
TO MAKE AN OUTSIDE CALL
1) Leave the handset on-hook.
2) Depress any available 19 line key and listen for
dial tone.
l CO LED will flash at the l-use rate.
3) Dial the desired telephone number.
4) Lift the handset when the distant party answers.*
5) Hang up when the call is completed.
TO MAKE AN INTERCOM CALL
1) Leave the handset on-hook.
2) Depress the m key.
l INT LED will flash at the l-use rate.
3) Dial the desired station number.
l You will hear a single ring tone.*
(contimm