p-TOSHIBA.-q
CALL FUNCTIONS
(continued)
SPEAKERPHONE (cont.)
0
Push-on/Push-off-The microphone and accompa-
nying LED are OFF during on-hook dialing and
ON at all other times while the speakerphone is
activated. They can be switched OFF/ON or vice
versa by a momentary depression of the
m
key. They will then remain in the same state until
the
m
key is depressed again or the call is
terminated.
NOTES:
1.
To change from Speakerphone to handset:
l
Lift handset.
2. To change from handset to Speakerphone:
l Depress and hold the
m
key.
l
Return handset on-hook.
l Release the
m
key.
See also Station Security
(
m
key).
TONE SIGNALLING
PROGRAMMABLE OPTION
This feature provides ringing on incoming intercom
calls when voice announcing is not activated.
TO MAKE A TONE SIGNAL CALL
1) Call another station via intercom.
l The called party hears ringing while you hear
ringback
tone until the call is answered.
2)
Speak to the party when the call is answered.
To make a voice call, dial
fl
after the station number.
TO ANSWER A TONE SIGNAL CALL
1)
Lift handset or depress the
m
key (handsfree
answerback is inoperative).
2)
Hang up when the call is completed.
To Next Page
Loading...
