CALL HOLD and TRANSFER (cont.)
EXCLUSIVE HOLD
(CO line must appear on your station)
While connected to an outside call, depress the
m
key twice.
l The CO line LED will flash at a fast (10 IPS) rate.
l To reconnect the call, depress
thealine
key on
hold.
NOTE:
When a CO line is placed on Exclusive Hold, it may not
be picked up by another station.
NIGHT TRANSFER
PROGRAMMABLE OPTION
On an optional basis, your system can function with
two or three ringing patterns. If three patterns are
selected, they are designated DAY, DAY 2, and NITE.
If only two patterns are selected, DAY and
NITE
designations are used.
l In both cases, different ringing patterns are chosen by
sequential depressions of the
m
key on station 10.
l The active pattern is shown by the state of the NT
LED as follows:
DAY
DAY 2
NITE
Three-pattern
Two-pattern
OFF
OFF
FLASH
N/A
ON ON
To Next Page
Loading...
