CALL HOLD and TRANSFER (cont.)
CALL TRANSFER
WITH
CAMP-ON (cont.)
TO ANSWER A TRANSFERRED CALL (if your sta-
tion is busy)
1) You will hear a 1-sec. warning tone.
l The outside call is camped-on your station.
*The CO LED flashes at the l-hold rate.
2) You have several choices:
a) Depress the appropriate
m
key.
l The existing call will be terminated.
l The new line will be answered and its LED
changes to the l-use flash rate.
bl) Hang up.
l The existing call will be terminated.
l The camped-on line will ring at your EKT.
l The CO LED changes to the l-called flash rate.
b2)
Depress the
(9
key to answer the call.
*The
CO LED changes to the l-use flash rate.
cl) Depress the
m
key (if conversing on a
CO line).
aExisting
CO call will be put on hold.
oThe
camped-on line will ring at your EKT.
l The CO LED changes to the l-called flash rate.
c2)
Depress the
m
key to answer the call.
*The CO LED changes to the l-use flash rate.
NOTE:
If
your EKT has the Ringing Line Preference feature,
you may depress the
m
key or lift the handset
instead of depressing the
m
key.
C-TOSHIBA
To Next Page
Loading...
