MESSAGES
(continued)
STATION-TO-STATION
MESSAGE WAITING WITH LCD
1)
Lift the handset.
2)
Dial the desired station number.
l If no answer (busy or DND), depress the
m
key. This causes the
m
key on the called
station to flash.
l The called station’s LCD will display the calling
station number.
3) Called station user depresses the
m
and
m
keys to return the call.
4) To clear the
MW/FL
LED at the called station,
depress the
m
key.
5) To clear the
MW/FL
LED from the calling station,
depress the , dial the station number and
depress the
NOTE:
Up to four Message Waiting displays may be stored on
the LCD; the station number in the left most position will
be called when the
m
key is depressed. To rotate
the station numbers, depress the
i
key.
To Next Page
Loading...
