CALL FUNCTIONS
(continued)
SPEAKERPHONE (cont.)
TO RECEIVE AN INCOMING CALL
1) You will hear a ringing tone.
2) Leave the handset on-hook.
3) Depress the key of the CO line that is flashing at
the CO incoming rate.
l
CO LED will flash at the l-use rate.
4) Speak at a normal voice level in the direction of
the telephone.
5) Depress the
m
key when the call is completed.
TO MAKE AN INTERCOM CALL (ON-HOOK DIAL-
ING)
1)
Leave the handset on-hook.
2) Depress the
m
key.
l
Listen for intercom dial tone.
l INT LED will flash at the l-use rate.
3) Dial the desired station number.
l
You will hear a single ring tone.
4) Speak at a normal voice level in the direction of
the telephone.
5) Depress the
m
key when the call is completed.
MICROPHONE CONTROL
The
m
key cuts off the speakerphone’s micro-
phone for private conversations. The
MIC
LED indicates
the status of the microphone:
LED
MICROPHONE
ON
ON
OFF
OFF
The
m
key can function in one of two modes.
Your EKT is equipped with the mode that is checked:
0
Momentary-The microphone and accompanying
LED are always ON when the speakerphone is
activated unless the
m
key is depressed. The
MIC LED and microphone will be OFF while the
m
key is depressed and return to ON when the
key is released.
(continued)
A
To Next Page
Loading...
