-ToSH’6A-
CALL FUNCTIONS (continued)
CONFERENCE CALLS (cont.)
TO CONFERENCE UP TO FOUR STATIONS ON
ONE INTERCOM LINE
1) Establish a two-station intercom call.
2) Depress
them
key.
l
You will hear intercom dial tone.
l The INT LED will flash at the conference rate.
3) Dial the third station’s number.
4) Depress
them
key after the party answers.*
l INT LED will flash at the l-use rate.
l
All parties will be conferenced.
5)
Repeat to add a fourth station.
*NOTES:
1.
If you receive a busy tone or no answer, return to
2.
the original connection by depressing the
m
key.
The new station will not be conferenced unless the
user lifts the handset or depresses the
m
key.
To Next Page
Loading...
