4.3 PC card/SD card 4 Replacement Procedures
4.3 PC card/SD card
4.3.1 PC card
Removing the PC card
The following describes the procedure for removing the PC card. (See Figure 4-2.)
Caution: Insert or remove the PC card in accordance with any instructions in the PC
card manual or the manuals of the computer system you are using.
1. Turn the computer upside down.
2. Push the ejection button. It will pop out when you release it. Press it once more to
eject the PC card.
3. Pull out the PC card and remove it.
4. Push in the ejection button again.
Eject button
PC card
Figure 4-2 Removing the PC card
Installing the PC card
The following describes the procedure for installing the PC card. (See Figure 4-2.)
1. Make sure the eject button does not stick out.
2. Insert the PC card carefully to ensure a firm connection.
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 4-11
To Next Page
Loading...
