2.4 System board Troubleshooting 2 Troubleshooting
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 2-17
2.4 System board Troubleshooting
This section describes how to determine if the System board is defective. Start with Procedure
1 and continue with the other procedures as instructed. The procedures described in this
section are:
Procedure 1: Message Check
Procedure 2: Debug port (D port) Check on Boot Mode
Procedure 3: Diagnostic Test Program Execution Check
Procedure 4: Replacement Check
To Next Page
Loading...
