4.28 LCD latch assembly 4 Replacement Procedures
4.28 LCD latch assembly
Removing the LCD latch assembly
The following describes the procedure for removing the LCD latch assembly. (See Figure 4-
43.)
1. Remove the following screw and LCD latch assembly from the display cover.
• M2.5x4.0B FLAT BIND screw x1
M2.5x4.0B FLAT BIND
LCD latch assembly
Figure 4-43 Removing the LCD latch assembly
Installing the LCD latch assembly
The following describes the procedure for installing the LCD latch assembly. (See Figure 4-
43.)
1. Install the LCD latch assembly and secure it with the following screw.
• M2.5x4.0B FLAT BIND screw x1
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 4-65
To Next Page
Loading...
