4 Replacement Procedures 4.29 Digitizer
4.29 Digitizer
Caution: Read following instructions before handling the Digitizer.
Do not carry the LCD module by holding the FL cable in one’s hand because it may result
to cut the FL cable, and cause display function failure or lighting failure.
Be careful to use the bezel guide.
There is a portion where the bezel is sticking out because of the digitizer guide. Do not
press and rub the portion with bare hands or it may result cut your finger.
4-66 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)
To Next Page
Loading...
