4 Replacement Procedure 4.32 Fluorescent lamp
Attaching the tapes and insulation sheet
1. Attach the double sided-tape of PCB insulation sheet.
2. Attach the tape for fixing insulation sheet and two bezel tapes.
CAUTION: When attaching tape and insulation sheet, be careful not to damage the
PCB, cell and B/L.
Insulation sheet
Tape for fixing the insulation sheet
Bezel ta
e
Figure 4-59 Replacing 14.1 Inch TMD fluorescent lamp (11)
4-88 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)
To Next Page
Loading...
