3.4 Heatrun Test 3 Tests and Diagnostics
TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 3-11
3.4 Heatrun Test
To execute this program, press 2, Repair Heatrun and press Enter in the startup menu, press
Enter.
After selecting this test, the same subtests as 3.23 RUNNING TEST is executed
successively.
For more details on the procedure and test content, refer to RUNNING TEST.
When the heatrun test ends, following message appears in the display.
************************************************
HEATRUN TEST END
************************************************
Press any key to continue...
Press any key and return to the startup menu.
To Next Page
Loading...
