4.3 SIM card 4 Replacement Procedures
4.3 SIM card
Removing the SIM card
To remove the SIM card, follow the steps below and refer to Figure 4-2.
CAUTION: Insert or remove an SIM card in accordance with any instructions in the SIM
card manual or the manuals of the computer system you are using.
1. Slide the SIM card latch to release the card.
2. Push the SIM card and release it. It will pop out of the slot.
SIM card
Latch
Figure 4-2 Removing the SIM card
Installing the SIM card
To install the SIM card, follow the steps below and refer to Figure 4-2.
1. Slide a SIM card into the SIM card slot with the metal connectors facing up.
2. Push the SIM card gently until it clicks into place.
3. Slide the SIM card latch right to secure the card in the slot.
TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-13
To Next Page
Loading...
